Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1401131.015
Citation: 01013
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $13,260.00
Current Penalty: $7,956.00
Issuance Date: 11/13/2019
Nr Instances: 6
Nr Exposed: 14
Abatement Date: 12/03/2019
Gravity: 10
Report ID: 0215800
Contest Date: 11/21/2019
Final Order: 10/14/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 10/14/2021 | $7,956.00 | 12/03/2019 | Serious | |
| Penalty | C: Contested | 11/22/2019 | $13,260.00 | 12/03/2019 | Serious | |
| Penalty | Z: Issued | 11/13/2019 | $13,260.00 | 12/03/2019 | Serious |
Text For Citation: 01 Item/Group: 013 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Assembly Area, on or about 5/31/19: Greenerd Press #1 was not equipped with adequate guarding in that the operator could reach into the point-of-operation from the right side when hand feeding parts into the machine. b) Assembly Area, on or about 5/31/19: Greenerd Press #2 was not equipped with adequate guarding in that the operator could reach into the point-of-operation from the right side when hand feeding parts into the machine. c) Assembly Area, on or about 6/4/19: Denison #4 Multi-Press was not equipped with adequate point-of-operation guarding in that the operators could reach into the danger zone. d) Assembly Area, on or about 6/4/19: Denison #2 Multi-Press was not equipped with adequate point-of-operation guarding in that the operators could reach into the danger zone. e) Assembly Area, on or about 6/4/19: Denison #1 Multi-Press was not equipped with adequate point-of-operation guarding in that the operators could reach into the danger zone. f) Machine Shop, on or about 6/10/19: Auto Tap Machine #8 was not equipped with adequate point-of-operation guarding in that the operator could reach into the danger zone.