Translate
Violation Detail
Standard Cited: 19100212 A03 III General requirements for all machines.
Inspection Nr: 1549878.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/29/2021
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 10/26/2021
Gravity: 5
Report ID: 0336000
Contest Date:
Final Order: 10/12/2021
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/12/2021 | $0.00 | 10/26/2021 | Serious | |
| Penalty | Z: Issued | 09/29/2021 | $0.00 | 10/26/2021 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone: a.) Tonnard Manufacturing Corporation; production area, press brake dept. - On or about 8/11/21, and at times prior thereto, employees operated press brakes including, but not limited to, a Toyokoki hydraulic press brake. Small width parts were being run, which put the operator's hands within four (4) inches of the point of operation on the hydraulic press brakes. The operators did not have hand tools to hold the parts and keep the employees hands out of the point of operation. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.