Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 463158.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,300.00
Current Penalty: $5,000.00
Issuance Date: 12/04/2012
Nr Instances: 1
Nr Exposed: 5
Abatement Date: 12/31/2012
Gravity: 10
Report ID: 0336000
Contest Date:
Final Order: 12/18/2012
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/18/2012 | $5,000.00 | 12/31/2012 | Serious | |
| Penalty | Z: Issued | 12/04/2012 | $6,300.00 | 12/31/2012 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing for likely to cause death or serious physical harm to employees in that employees were exposed to: a) Advanced Cast Products, Inc. / 18700 Mill Street, Meadville, PA Foundry Area: On or about June 7, 2012, employees were exposed to burn hazards from molten metal reacting with moisture in the refractory material and spewing into the work environment. Employee received burns from a reaction that caused molten metal to spew out of the ladle while it was being transported by forklift to an Autopour. The refractory material for the ladle was not installed in accordance with prescribed methods in that the refractory mix was estimated (note measured), water for the refractory mix was estimated (not measured), temperature measurements were not taken during curing, and drying/curing time was estimated.
Translate